Cisco Catalyst WS-C2960XR-48FPD-I Switch

Cisco Catalyst 2960-X series switch offers a number of redundancy and resiliency features to prevent outages and help ensure that the network remains available.

Description

 

Cisco Catalyst WS-C2960XR-48FPD-I Switch

Switch Cisco 2960XR \ 2960XR-48FPD-I

Switch Cisco 2960XR 48FPD-I – L3 – managed – 48 x 10/100/1000 (PoE+) + 2 x SFP+ – desktop, rack-mountable – PoE+ (740 W)

Switch Cisco 2960XR 48 Network security

The Switch Cisco 2960X R 48 FPD-I series switch provides a range of security features to limit access to the network and mitigate threats.

Redundancy and resiliency

Cisco Catalyst 2960-X series switch offers a number of redundancy and resiliency features to prevent outages and help ensure that the network remains available.

Catalyst WS-C2960XR-48FPD-I

Switch Cisco 2960XR 48 Application visibility

Switch Cisco 2960XR-48FPD-I series switch supports NetFlow Lite, which enables IT teams to understand the mix of traffic on their network and identify anomalies by capturing and recording specific packet flows.

Power management

The 2960XR-48FPD-I switch offers a range industry leading features for effective energy efficiency and energy management.

Switch Cisco 2960XR 48 Network management

The Switch Cisco 2960XR-48FPD-I series offers a superior CLI for detailed configuration and administration. 2960-X series switch is also supported in the full range of Cisco network management solutions

Switch Cisco 2960XR 48 Specifications

General

Device Type  :  Switch – 48 ports – L3 – managed – stackable

Enclosure Type  :  Desktop, rack-mountable 1U

Subtype :  Gigabit Ethernet

Ports : 48 x 10/100/1000 (PoE+) + 2 x SFP+

Power Over Ethernet (PoE)  :  PoE+

PoE Budget  :  740 W

 

Performance

Switching capacity   :    216 Gbps | Forwarding performance: 130.9 Mpps

Capacity  : Virtual interfaces (VLANs): 1023

Jumbo Frame Support  :  9216 bytes

Max Units In A Stack  :  8

Routing Protocol  :  OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng

Remote Management Protocol  :  SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI

Authentication Method  ;  Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features  :  Layer 2 switching, power over Ethernet (PoE), auto-negotiation, ARP support, Cisco Fast EtherChannel, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise technology, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS), Cisco FlexStack Plus

Compliant Standards  :  IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX

Processor  :  600 MHz

RAM  :  512 MB

Flash Memory  :  128 MB

Status Indicators :  Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE, link/activity

 

Switch Cisco 2960XR 48 Expansion / Connectivity

Interfaces  :  48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T – RJ-45 – RJ-45 24 ports (PoE+) / 48 ports (PoE) – 30 W | 1 x console SFP+ – RJ-45 | 1 x mini-USB Type B management | 2 x USB Type A | 1 x 1000Base-TX RJ-45 management | 2 x SFP+ uplink

Expansion Slots  :  1 (total) / 1 (free) x Stacking Module slot

 

Switch Cisco 2960XR 48 Power

Power Device  :  Internal power supply

Installed Qty :  1 (installed) / 2 (max)

Power Redundancy   :  Optional

Power Redundancy Scheme  :  1+1 (with optional power supply)

Power Provided  :  1025 Watt

Voltage Required  :  AC 120/230 V (50/60 Hz)

Features  :  Redundant Power System (RPS) connector

 

Switch Cisco 2960XR 48 Miscellaneous

MTBF  :  231,590 hours

Compliant Standards  :  CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386

 

Switch Cisco 2960XR 48 Software / System Requirements

Software Included  :  Cisco IOS IP Lite

 

Switch Cisco 2960XR 48 Dimensions & Weight

Width  :  17.5 in

Depth  :  16.1 in

Height  :  1.8 in

Weight  :  14.55 lbs

 

Switch Cisco 2960XR 48 Manufacturer Warranty

Service & Support  :  Limited warranty – advance parts replacement – lifetime – response time: next business day | Technical support – consulting – 90 days

 

Switch Cisco 2960XR 48 Environmental Parameters

Min Operating Temperature  :  23 °F

Max Operating Temperature  :  113 °F

Humidity Range Operating  :  10 – 95% (non-condensing)

Min Storage Temperature  :  -13 °F

Max Storage Temperature  :  158 °F

Humidity Range Storage  :   10 – 95% (non-condensing)

More Information

Additional information

Brand

Item Type

Reviews

There are no reviews yet.

Be the first to review “Cisco Catalyst WS-C2960XR-48FPD-I Switch”

Your email address will not be published. Required fields are marked *