Cisco Aironet 3802I Access Point
802.11ac Wave 2 support
Provides a theoretical connection rate of up to 2.6 Gbps per radio – roughly double the rates offered by today’s high-end 802.11ac access points.
Cisco Aironet 3802I Access Point High-density experience
Best-in-class RF architecture that provides high-performance coverage for a high density of client devices, giving the end user a seamless wireless experience.
Features include custom hardware in 802.11ac Wave 2 radios, Cisco CleanAir, Cisco ClientLink 4.0, cross-access point noise reduction, and an optimized client roaming experience.
Multiuser multiple-input multiple-output (MU-MIMO) technology
Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.
Multigigabit Ethernet support
Providing multiple Gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100 Mbps and 1 Gbps speeds.
All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T cabling.
160-MHz channel support
Cisco Aironet 3802I Access Point Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically switch between 20-, 40-, 80-, and 160-MHz channels, depending on the RF channel conditions, providing the industry’s well-performing wireless network.
Zero-impact Application Visibility and Control
Uses dedicated hardware acceleration to improve the performance of line-speed applications such as Cisco Application Visibility and Control.
Dual 5 GHz radio support
Enables both radios to operate in 5 GHz client serving mode, allowing 5.2 Gbps over-the-air speed while increasing client capacity.
Cisco Aironet 3802I Access Point Smart antenna connector
An intelligent second physical antenna connector is included on 3800 Series models with an external antenna.
This connector provides advanced network design flexibility for high-density and large open-area environments such as auditoriums, convention centers, libraries, cafeteria, and arenas/stadiums, allowing two sets of antennas to be connected and active on a single access point.
Automatic link aggregation (LAG) support
802.3ad (Link Aggregation Control Protocol [LACP]) compliant, allowing both Gigabit Ethernet interfaces to automatically enable LAG, increasing overall throughput to the access point.
Cisco ClientLink 4.0
Cisco ClientLink 4.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as smartphones and tablets.
Cisco Aironet 3802I Access Point Specifications
Device Type : Wireless access point
Ruggedized Design : Indoor
Cisco Aironet 3802I Access Point Width : 8.7 in
Depth : 8.7 in
Height : 2.5 in
Weight : 4.61 lbs
Localization : Bahrain, Kuwait, Israel, Egypt, Algeria, Morocco, Tunisia, Belarus
Form Factor : External
Connectivity Technology : Wireless
Data Transfer Rate : 5.2 Gbps
Data Link Protocol : IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Frequency Band : 2.4 GHz, 5 GHz
AIR-AP3802I-I-K9 Capacity : Spatial streams: 3
Status Indicators : Boot state, error, status
Cisco Aironet 3802I Access Point Features : Auto-sensing per device, DFS support, CleanAir technology, Link Aggregation Control Protocol (LACP), Maximum Ratio Combining (MRC), 4T4R MIMO technology, cyclic shift diversity (CSD), beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, Optimized AP Roaming, Cross AP Noise Reduction, MIMO equalization, ClientLink 4.0 technology
Encryption Algorithm : AES, TKIP
Authentication Method : Extensible Authentication Protocol (EAP)
Compliant Standards : IEEE 802.11b, IEEE 802.11a, IEEE 802.3ad (LACP), IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n, IEEE 802.11k, IEEE 802.11ac, IEEE 802.11w, IEEE 802.11v, IEEE 802.3bz
Antenna : Internal
AIR-AP3802I-I-K9 Interfaces : 1 x 1/2.5/5GBase-T – RJ-45 | 1 x 1000Base-T (auxiliary) – RJ-45 | 1 x management – RJ-45
Included Accessories : Low profile bracket, ceiling grid clip
Compliant Standards : VCCI, ICES-003, FCC Part 15.247, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, EN 300 328, FCC OET Bulletin 65c, RSS-247, EN 50155, EN 301 893, CAN/CSA-C22.2 No. 60950-1, EN 301 489-17
Software Included : CAPWAP Software Image
Service & Support : Li;mited warranty – advance hardware replacement – lifetime – response time: 10 days