Description
Aruba 500H Series Hospitality Access Points
Aruba 500H Series \ Aruba Wireless For Hospitality High performance and cost-effective Wi-Fi 6 for hospitality, branch, and remote access.
High-performance, wired and wireless connectivity for any organization experiencing growing mobile, cloud, and IoT requirements in medium-density environments.
Aruba 500H Series support wired and wireless connectivity (in a single device) from hotels, branch offices, or teleworker initiatives for up to 1.5 Gbps of maximum wireless throughput and 256 associated clients per Wi-Fi radio. USB port for cellular backhaul or IoT expansion (505H).
Aruba 500H Series Specs
AP type :
- Indoor, dual radio, 5GHz and 2.4GHz 802.11ax 2×2 MIMO
5GHz radio :
- Two spatial stream (SU/MU) MIMO for up to 1.2Gbps wireless data rate (HE80)
2.4GHz radio:
- Two spatial stream (SU/MU) MIMO for up to 287Mbps wireless data rate (HE20)
- Note: HE40 operation is supported in 2.4GHz, but uncommon and not recommended for enterprise deployments
Aruba 500H Series Maximum number of associated client devices :
- Up to 256 associated client devices per radio
Maximum number of BSSIDs :
- 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply) :
- 2.400 to 2.500GHz (ISM) channels 1-13
- 5.150 to 5.250GHz (U-NII-1) channels 36, 40, 44, 48
- 5.250 to 5.350GHz (U-NII-2A) channels 52, 56, 60, 64
- 5.470 to 5.725GHz (U-NII-2C) channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144
- 5.725 to 5.850GHz (U-NII-3) channels 149, 153, 157, 161, 165
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Aruba 500H Series Supported radio technologies :
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
- 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units
Supported modulation types :
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
- 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
Aruba 500H Series 802.11n high-throughput (HT) support :
- HT20/40
802.11ac very high
throughput (VHT) support :
- VHT20/40/80
Aruba 500H Series Supported data rates (Mbps) :
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM
- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80), 1,083 with 1024-QAM
- 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
- 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
802.11n/ac/ax packet aggregation :
- A-MPDU, A-MSDU
Transmit power :
- Configurable in increments of 0.5 dBm
Aruba 500H Series Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
- 2.4 GHz band: +20 dBm (17 dBm per chain)
- 5 GHz band: +21 dBm (18 dBm per chain)
- Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
Minimum configurable transmit power level :
- 0 dBm (conducted, per chain)
Advanced Cellular Coexistence (ACC) :
- Minimizes the impact of interference from cellular networks
Advanced IOT Coexistence (AIC) :
- Allows concurrent operation of multiple radios in the 2.4GHz band without performance, range or capacity degradation
Aruba 500H Series Maximum ratio combining (MRC) :
- For improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) :
- For improved downlink RF performance
Space-time block coding (STBC) :
- For increased range and improved reception
Low-density parity check (LDPC) :
- For high-efficiency error correction and increased throughput
Aruba 500H Series Transmit beam-forming (TxBF):
- For increased signal reliability and range
802.11ax Target Wait Time (TWT):
- To support low-power client devices
VPN IPsec throughput performance:
- 500Mbps or better
